In RAID 0 mode, you will take two identical hard drives and spread the data across them. On your computer, it will look like you just have a single 2TB drive. But with RAID 0, when you load a file both of your drives are sending data at Mbps each, making your total transfer speed Mbps. This is known as the mirroring mode. The disks are configured the same as before, with two identical drives joined as one. This time, instead of spreading data across the two drives, the data is exactly the same on each one.
The 2TB of storage you have in your computer will only show up as 1TB, but you are protected from data loss if a drive fails. When one breaks, the data is simply read off the other disk. This is a combination of the two modes above. You take four identical drives and install them. Two of the drives have the data spread out between them, while the other two duplicates the information on the first two drives. There are other RAID configurations, but those are the only four that can be configured in a desktop environment.
If you decide you want to take advantage of one of these configurations, the first step is to install a RAID card in your desktop. With so many possible configurations, it can be hard to understand which card will work for you. Delivering cost-effective controller solutions from China, IO Crest offers unbeatable value.
Their products are in widespread use, as they supply many large computer manufacturers with peripherals. Additionally, it can be purchased with anywhere from two to eight SATA ports. One configuration even offers you four external ports found on the back of the card, and four more internal ports. The performance of this card is high enough that you will be able to use any single drive available on the market without any reduction in its maximum potential speed. Since the latest SATA standards are supported, the drives will operate the way they were designed to.
This bandwidth is shared between all of the active SATA ports. This is a pretty vanilla device designed for simple applications. It does, however, have one handy feature. That is the inclusion of Native Command Queue. This is an extension of the SATA protocol that allows the drives to change the order in which data is sent.
Due to the seek times caused by the presence or read heads, Native Command Queue is only beneficial for hard drives. The StarTech. You can select up to four SATA ports in total, with different combinations allowing for external ports. Some configurations also offer an mSata port, a common connector used for small SSDs. But if you were planning to use multiple high end SSDs, it is possible that there may be some bottlenecking. Peak transfer speed is possible when working on large files under ideal conditions.
In RAID 0, you would still seem some performance improvement over a single drive. The RAID array would compensate during the times when the drives were operating in challenging conditions. That makes this card is a great choice for users who want to use the redundancy features of RAID 1, or are willing to accept a modest improvement from RAID 0. RAID can only combine identical drives into one volume. HyperDuo lets you combine drives of any size. Ideally, you could take the massive storage space of a hard drive and combine it with the snappy performance of an SSD.
HyperDuo will automatically find the most commonly used files and put them on the SSD, improving the overall system performance. Unfortunately, HyperDuo is not yet supported on Windows 10, so this feature is for windows 7 and 8 users only. While Vantec is a relatively unknown company, their RAID controller card is one of the most powerful solutions on the market.
While only four can be in use at any time, FIS switching allows ports to be activated on-the-fly. Finally, RAID 10 could give you the best of both worlds through a lightening quick disk array that is immune to failure. Based on the technologies that are available to us, this PCIe SATA controller card lets us take full advantage of even the newest drives on the market.
No matter what combination of drives and configurations we use, the bottleneck is almost always going to be the drives, not this card. This acronym quite literally means Just a bunch of disks. True to its name, it allows you to take as many drives as you want and combine them into a single volume.
Excellent , 4. Skip to the end of the images gallery. Skip to the beginning of the images gallery. Out of stock. Product Details. Wide CompatibilityThe controller card is widely supported across all popular operating system platforms including Windows 7, 8, 10, 11 , macOS Plus, with support for PCIe 2. Hassle-Free InstallationThe SATA controller card features plug-and-play installation and can be installed in a full-profile or low-profile computer systems with the full-profile bracket preinstalled, and an interchangeable low-profile half-height bracket included.
Never connect to pixel data. Dell's new always-on two physical network compression and reduces the instant-on concept. That seems like the server is frame rate, screen.
Shop over , Products In Stock. Next Day Delivery Available. Get all your Parts Today. Find the Components You Need. Free UK Delivery on Eligible Orders! RAID Controllers ; Highpoint RocketRAID (RR) 2 channel Internal PCI-e v2 x1 to SATA · LN ££ NEXT DAY DELIVERY ; RocketRAID L eSATA / SATA.